The instrumentation industry needs to master the core technology

At the Huawei New Employees Forum on April 20, Chen Lifang, Huawei Director and Senior Vice President, said: "We must face up to the strength of the United States, see the gap, learn from the United States firmly, and never let anti-American sentiment dominate our work. All staff must have a sense of crisis, not blindly optimistic, and have no narrow nationalism. 

Why learn from the United States?

After 40 years of reform and opening up, the gap between China and the United States is no longer one hundred and eighty thousand miles, but the gap is still very big. Chen Lifang pointed out that in addition to the vast gap between us and the United States in the field of basic materials, there is a wider gap between precision and intelligent instruments and experimental instruments and equipment.
For example, in high precision, high stability, intelligent pressure, flow, level, composition instruments and high reliable actuators, smart grid advanced measuring instruments (AMI), materials analysis precision testing instruments and mechanical properties testing equipment, new non-destructive testing and environmental safety testing equipment, national defense special testing equipment, high cocoa Reliability, force and magnetic sensors, new composite, optical fiber, MEMS, biosensors, instrument chips, chromatographic, spectral, mass spectrometry detectors can only be obtained by imported or special means.
Therefore, we must face up to the gap with the United States, can not be a small fortune is safe, can not get a little achievement to forget, night Lang arrogant. If the industry has no growth potential, no added value, no fine steel drill, just do some low-end products, no matter how good, do how big, can not catch up with the United States.

Actively "bring in" to better "go out"

The world today is an open world, and domestic instrumentation companies cannot build cars behind closed doors. Throughout the world, instrumentation companies have their own strengths and weaknesses. Only by learning from each other and learning from each other can we continue to improve and shorten the gap with well-known instrumentation companies.
Instrument enterprises should take the opportunity of the fortieth anniversary of reform and opening up, conform to the trend of deep integration of China's economy into the world economy, actively improve the level and level of opening up of instrument manufacturing industry, and further integrate into the development of the global instrument industry.
In July 16th, the "2018 national manufacturing power expert forum" was held in Beijing. Xin Guobin, Vice Minister of the Ministry of Industry and Information Technology, attended the forum and said that China's manufacturing industry should be more vigorous to "bring in". Recently, the Ministry of Commerce announced the situation of foreign investment in the first half of this year. The data show that 29 591 new foreign-invested enterprises were set up in the first half of the year, up 96.6% over the same period of last year, and the actual use of foreign capital was 446.29 billion yuan, up 1.1% over the same period of last year.
It is noteworthy that the actual use of foreign capital in manufacturing industry is 134.83 billion yuan, up 4.9% from the same period of last year, accounting for 30.2%. The actual use of foreign capital in high-tech manufacturing was 43.377 billion yuan, up 25.3% over the same period of last year. The manufacturing of electronic and telecommunications equipment, computer and office equipment, medical equipment and instrumentation increased by 36%, 31.7% and 179.6% respectively.
Introducing foreign capital is helpful to introducing foreign advanced technology, helping enterprises break through the technical bottleneck quickly and realize technological innovation and upgrading. For domestic instrument enterprises, they must learn and make use of foreign advanced experience, be good at absorbing all the good things from abroad, and use them for themselves.
In June 2017, Zhejiang Sailun Xin Instrument Co., Ltd. and Shimadzu signed a cooperation agreement, Sailun Xin independent digestion of VOCs catalytic technology and a series of advanced gas chromatography and other detection hardware, jointly entered the field of China's volatile organic compounds (VOCs) market control; in view of the domestic atmospheric aerosol particulate pollution situation, poly The LAMPAS-3 Plus on-line mass spectrometry monitoring system for atmospheric particulate matter has been successfully developed through technical cooperation with Giessen University in Germany and the introduction of advanced single-particle aerosol spectroscopy technology.
At present, China has become the world's second largest instrument manufacturer, instrument manufacturing began to move from low-end to high-end. High-end instrument manufacturing needs long-term technology accumulation and precipitation. Facing the current situation of insufficient development capacity of China's high-end instrument manufacturing, in addition to concentrating resources and increasing investment in technology research and development, it also needs the help of foreign technology and capital, from scratch, from weak to strong, from imitation to innovation. Steadily upgrading the level of high-end instrumentation manufacturing technology in China.

Independence is the absolute principle of development.

Recently, the Central Committee of the Party promulgated the National Innovation-Driven Development Strategic Outline, clearly pointing out the "three-step" goal: to enter the ranks of innovative countries by 2020; to be among the forefront of innovative countries by 2030; to become a world scientific and technological power by the founding of New China 100 years ago.
At present, China's economy has changed from high-speed growth stage to high-quality development stage, strengthening the key technology is the only way to upgrade the industrial transformation. If China's instrument manufacturing industry wants to be really strong, the rise of the road must rely on their own, only through self-reliance can truly master the core technology.
The "ZTE Incident" has exposed the huge gap between China and the world, and has shown us that the core technology can not come, can not be bought, can not be obtained. Only by grasping the key core technology in their own hands, can we fundamentally safeguard national economic security, national defense security and other security, can we not be "stuck in the neck".
On Aug. 16, the National Natural Science Foundation of China (NSFC) announced the results of the project evaluation for the National Natural Science Foundation in 2018. Among them, 59 units have been granted major national scientific research instrument projects (free application), the total number of projects is 86, the total amount is 607 million yuan, and focus on supporting the development of original major scientific research instruments and equipment, providing more innovative means and tools for scientific research, in order to comprehensively enhance China's original innovation capacity.
In order to develop and expand China's instrumentation manufacturing industry, we should not only learn from foreign advanced enterprises, but also unswervingly adhere to independent innovation, firm innovation confidence, focus on strengthening independent innovation ability, speed up the breakthrough of key technology, and promote the high-quality development of instrumentation manufacturing industry.